Construction method of insulation layer3

The flatness of the floor plays a very important role in the assembly of the warehouse board, as the combination library is already finalized at the factory and cannot change with changes in terrain or structure.

The floor requires the user to ensure that the unevenness does not exceed 3mm. If it is a fiberglass warehouse, careful adjustment must be made when making brackets, and the height difference should not exceed 3mm.

3

Installation procedures and requirements for the library body: After the bottom of the library body is installed, the library door cannot be installed first or last, because both the first and last installations can easily cause deformation of the library door, which can lead to poor closure, light transmission, and plate to plate bonding

2 19

word

Use a cylinder filled foaming agent for the seam, fill it fully, and hang the hook tightly to minimize the gap as much as possible. The seam gap should not exceed 2mm. If it is a fiberglass warehouse, it is recommended that users apply aluminum foil tape to all seams, seal them again, and prevent moisture.